xB L4-2.4L (2AZ-FE) (2009)
![background image](/scion/xb/l4-2.4l_(2az-fe)/Page-1140009.png)
(c) Using a plastic-faced hammer, fix the buckle into place by tapping it. At the same time, use the plastic-faced hammer to adjust the lift of the
lever so that the gaps between the buckle flange and lever end flange are even.
NOTICE: Do not damage the boot.
9. INSTALL FRONT NO. 2 AXLE OUTBOARD JOINT BOOT CLAMP RH
HINT: Use the same procedure as for the LH side.
10. INSTALL FRONT AXLE OUTBOARD JOINT BOOT CLAMP LH
CAUTION: Wear protective gloves while performing the operation and be careful to avoid cutting your hands or other body parts.
(a) Install a new boot clamp onto the outboard joint boot and temporarily bend the lever.
NOTICE: When temporarily bending the lever, make sure not to deform the band and lever.
(b) Using water pump pliers, temporarily lock the boot clamp by clamping it down until a "click" sound is heard.