xD L4-1.8L (2ZR-FE) (2008)
10. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(a) Remove the 2 screws.
(b) Disengage the claw and the 2 guides and remove the instrument panel under cover.
11. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(a) Disengage the 3 claws and the 2 guides and remove the instrument panel under cover.
12. REMOVE COWL SIDE TRIM BOARD RH
(a) Disengage the 3 guides and remove the cowl side trim board.
13. REMOVE COWL SIDE TRIM BOARD LH
HINT: Use the same procedure as for the RH side.