xD L4-1.8L (2ZR-FE) (2008)
Parking Brake Lever: Service and Repair
Removal
PARKING BRAKE: PARKING BRAKE LEVER: REMOVAL
REMOVAL
1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) See: Body and Frame/Interior Moulding / Trim/Console/Service
and Repair/Removal
2. REMOVE UPPER CONSOLE PANEL See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
3. REMOVE REAR CONSOLE BOX COVER See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
4. REMOVE CONSOLE BOX CARPET See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
5. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
6. SEPARATE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY
(a) Remove the lock nut and wire adjusting nut.
(b) Separate the parking brake pull rod from the parking brake lever.
7. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY
(a) Disconnect the parking brake switch connector.
(b) Remove the 3 bolts and remove the parking brake lever.
8. REMOVE PARKING BRAKE SWITCH ASSEMBLY
(a) Remove the screw and remove the parking brake switch.