xD L4-1.8L (2ZR-FE) (2008)
Thermostat: Service and Repair
Installation
2ZR-FE COOLING: THERMOSTAT: INSTALLATION
INSTALLATION
1. INSTALL THERMOSTAT
(a) Install a new gasket onto the thermostat.
(b) Install the thermostat with the jiggle valve facing upward.
HINT: The jiggle valve may be set within 10° on either side, as shown in the illustration.
2. INSTALL WATER INLET
(a) Install the water inlet with radiator hose with the 2 nuts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
3. ADD ENGINE COOLANT See: Coolant/Service and Repair
4. INSPECT FOR ENGINE COOLANT LEAK See: Testing and Inspection