xD L4-1.8L (2ZR-FE) (2008)
(a) Install the water inlet hose with the clip.
27. INSTALL FAN BELT ADJUSTING BAR See: Service and Repair/Removal and Replacement/Engine Unit/Installation
28. INSTALL GENERATOR ASSEMBLY
29. INSTALL OIL LEVEL GAGE GUIDE See: Service and Repair/Removal and Replacement/Engine Unit/Installation
30. INSTALL OIL LEVEL DIPSTICK
31. INSTALL INTAKE MANIFOLD See: Service and Repair/Removal and Replacement/Engine Unit/Installation
32. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transaxle) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation
33. INSTALL TRANSMISSION OIL LEVEL GAGE SUB-ASSEMBLY (for Automatic Transaxle)
34. INSTALL NO. 1 OIL COOLER OUTLET TUBE (for Automatic Transaxle) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation
35. INSTALL NO. 1 OIL COOLER INLET TUBE (for Automatic Transaxle) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation
36. INSTALL NO. 2 OIL COOLER TUBE CLAMP (for Automatic Transaxle) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation
37. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine
Assembly/Installation
38. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
39. INSTALL FRONT AXLE ASSEMBLY LH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Installation
40. INSTALL FRONT AXLE ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
41. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH See: Transmission and Drivetrain/Drive Axles, Bearings and
Joints/Axle Shaft Assembly/Service and Repair/Installation
42. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
43. INSTALL FRONT STABILIZER LINK ASSEMBLY LH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Installation