xD L4-1.8L (2ZR-FE) (2008)
(a) Using a union nut wrench, separate the inlet No. 1 oil cooler tube while holding the oil cooler tube union with a wrench.
(b) Using a union nut wrench, separate the outlet No. 1 oil cooler tube while holding the oil cooler tube union with a wrench.
(c) Remove the bolt and remove the oil cooler tube clamp.
19. REMOVE TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY
(a) Remove the transmission oil level dipstick.
(b) Disconnect the breather hose.
(c) Remove the bolt and remove the transmission oil level gauge sub-assembly.
20. REMOVE ENGINE OIL LEVEL DIPSTICK
21. REMOVE THROTTLE BODY ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Removal
22. REMOVE INTAKE MANIFOLD