xD L4-1.8L (2ZR-FE) (2008)
Exhaust Manifold: Service and Repair
Removal
2ZR-FE EXHAUST: EXHAUST MANIFOLD: REMOVAL
REMOVAL
1. REMOVE AIR FUEL RATIO SENSOR
Refer to the procedures under "REMOVE AIR FUEL RATIO SENSOR" See: Powertrain Management/Computers and Control Systems/Oxygen
Sensor/Service and Repair/Air Fuel Ratio Sensor/Removal.
2. REMOVE ENGINE UNDER COVER RH
3. REMOVE FRONT EXHAUST PIPE ASSEMBLY
Refer to the procedures under "REMOVE FRONT EXHAUST PIPE ASSEMBLY" See: Exhaust Pipe/Service and Repair/Removal.
4. DRAIN AUTOMATIC TRANSAXLE FLUID (for Automatic Transaxle)
5. DRAIN MANUAL TRANSAXLE OIL (for Manual Transaxle)
6. REMOVE FRONT WHEEL
7. REMOVE FRONT AXLE SHAFT RH NUT See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Removal
8. REMOVE FRONT SPEED SENSOR RH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Removal
9. REMOVE TIE ROD END SUB-ASSEMBLY RH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Removal
10. REMOVE FRONT STABILIZER LINK ASSEMBLY RH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Removal
11. REMOVE NO. 1 FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH See: Transmission and Drivetrain/Drive Axles, Bearings and
Joints/Axle Shaft Assembly/Service and Repair/Removal
12. SEPARATE FRONT AXLE ASSEMBLY RH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Removal
13. REMOVE DRIVE SHAFT ASSEMBLY RH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Removal
14. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
(a) Remove the 4 bolts and remove the No. 1 exhaust manifold heat insulator.
15. REMOVE MANIFOLD STAY
(a) Remove the 3 bolts and remove the manifold stay.