xD L4-1.8L (2ZR-FE) (2008)
Exhaust Manifold: Service and Repair
Installation
2ZR-FE EXHAUST: EXHAUST MANIFOLD: INSTALLATION
INSTALLATION
1. INSTALL NO. 2 EXHAUST MANIFOLD INSULATOR
(a) Install the No. 2 exhaust manifold heat insulator with the 3 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
2. INSTALL EXHAUST MANIFOLD
(a) Install a new exhaust manifold gasket and exhaust manifold with the 5 nuts.
Torque: 21 Nm (214 kgf-cm, 16 ft-lbf)
3. INSTALL MANIFOLD SUPPORT BRACKET
(a) Install the manifold support bracket with the 3 bolts in the sequence shown in the illustration.
Torque: 43 Nm (438 kgf-cm, 32 ft-lbf)
4. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
(a) Install the No. 1 exhaust manifold heat insulator with the 4 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
5. INSTALL DRIVE SHAFT ASSEMBLY RH See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Installation