xD L4-1.8L (2ZR-FE) (2008)
Exhaust Pipe: Service and Repair
Installation
2ZR-FE EXHAUST: EXHAUST PIPE: INSTALLATION
INSTALLATION
1. INSTALL FRONT EXHAUST PIPE ASSEMBLY
(a) Using vernier calipers, measure the free length of the compression spring.
Minimum length:
40.5 mm (1.594 in.)
If the length is not as specified, replace the compression spring.
(b) Using a plastic hammer and a wooden block, tap in a new exhaust pipe gasket until its surface is flush with the front exhaust pipe assembly.
NOTE:
-
Install the exhaust pipe gasket in the correct direction.
-
Do not damage the outer surface of the exhaust pipe gasket.
-
Do not reuse the exhaust pipe gasket.
-
Do not push in the gasket with the exhaust pipe when connecting it.
(c) Install the 3 exhaust pipe supports.