xD L4-1.8L (2ZR-FE) (2008)
7. REMOVE COOLER EXPANSION VALVE
(a) Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and detach the cooler expansion valve.
(b) Remove the 2 O-rings from the cooler evaporator.
8. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Disengage the evaporator temperature sensor connector clamp.
(b) Remove the 3 screws.
(c) Disengage the 4 claws and remove the heater case lower.
(d) Remove the cooler evaporator.
9. REMOVE DRAIN COOLER HOSE
(a) Remove the drain cooler hose.
10. REMOVE FRONT EVAPORATOR TEMPERATURE SENSOR See: Evaporator Temperature Sensor / Switch/Service and Repair/Removal
Reassembly
AIR CONDITIONING: AIR CONDITIONING UNIT: REASSEMBLY