xD L4-1.8L (2ZR-FE) (2008)
(d) Install the connector holder with the bolt.
Torque: 3.2 Nm (33 kgf-cm, 28 in-lbf)
6. INSTALL MAIN BODY ECU
(a) Install the main body ECU with the 2 bolts.
Torque: 3.2 Nm (33 kgf-cm, 28 in-lbf)
(b) Connect the 5 connectors and the 3 clamps.
7. CONNECT DRAIN COOLER HOSE
(a) Install the drain hose into the position shown in the illustration.
-
Install the drain hose with its UP mark facing upward, within the 90 degree range shown in the illustration.
-
Install the drain hose without twisting it.
8. INSTALL REAR NO. 3 AIR DUCT