xD L4-1.8L (2ZR-FE) (2008)
52. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Upper Instrument Panel/Installation
53. INSTALL COMBINATION METER ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service
and Repair/Combination Meter/Installation
54. INSTALL INSTRUMENT CLUSTER FINISH PANEL See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Service and Repair/Combination Meter/Installation
55. INSTALL FRONT PILLAR GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
56. INSTALL FRONT PILLAR GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
57. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Installation
58. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Installation
59. CONNECT HEATER WATER INLET HOSE A
(a) Install the heater water inlet hose onto the heater unit.
NOTE: Perform the installation with the hose clip and mark at the correct angle.
60. CONNECT HEATER WATER OUTLET HOSE A (FROM HEATER UNIT)
(a) Install the heater water outlet hose onto the heater unit.
NOTE: Perform the installation with the hose clip and mark at the correct angle.