scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Air Conditioning Unit|Page 6388 > < Air Conditioning Unit|Page 6386
Page 38
background image

61. INSTALL LIQUID TUBE SUB-ASSEMBLY

(a) Remove the vinyl tape from liquid tube and the connecting portion of the unit.
(b) Apply sufficient compressor oil (ND-OIL8) to a new O-ring and the connecting part of the liquid tube.

Compressor oil:
ND-OIL8 or equivalent

(c) Install the O-ring onto the liquid tube.
(d) Connect the liquid tube to the unit.

62. INSTALL SUCTION TUBE SUB-ASSEMBLY

(a) Remove the vinyl tape from the suction tube and the connecting part of the unit.
(b) Apply sufficient compressor oil (ND-OIL8) to a new O-ring and the connecting part of the suction tube.

Compressor oil:
ND-OIL8 or equivalent

(c) Install the O-ring onto the suction tube.

(d) Turn the hook connector in the direction indicated by the arrow in the illustration.
(e) Insert the pipe joints securely into the fitting holes and tighten the bolt.

Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)

63. INSTALL OUTER COWL TOP PANEL 

                 

64. INSTALL FRONT AIR SHUTTER SEAL RH 

                 

65. INSTALL FRONT WIPER MOTOR AND LINK See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper

Motor/Installation

                 

66. INSTALL COWL TOP VENTILATOR LOUVER LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper

Motor/Installation

                 

67. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front

Wiper Motor/Installation

                 

68. INSTALL HOOD TO COWL TOP SEAL See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation

                 

69. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper

Motor/Installation

                 

70. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper

Motor/Installation

                 

71. INSTALL FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation

                 

72. ADD ENGINE COOLANT 

                 

73. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)

74. INSPECT SRS WARNING LIGHT

 See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System

75. CHARGE REFRIGERANT See: Service and Repair

Air Conditioning Unit|Page 6388 > < Air Conditioning Unit|Page 6386