xD L4-1.8L (2ZR-FE) (2008)
41. REMOVE COMBINATION SWITCH ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal
42. DISCONNECT POWER STEERING ECU See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal
43. REMOVE INSTRUMENT PANEL SUB REINFORCEMENT See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal
44. REMOVE COLUMN HOLE COVER SILENCER SHEET See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal
45. SEPARATE STEERING SLIDING YOKE SUB-ASSEMBLY See: Air Conditioning Unit/Removal
46. REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS See: Brakes and Traction Control/Brake Pedal Assy/Service and
Repair/Removal
47. REMOVE BRAKE PEDAL SUPPORT See: Brakes and Traction Control/Brake Pedal Assy/Service and Repair/Removal
48. REMOVE STEERING COLUMN ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal
49. REMOVE REAR NO. 2 AIR DUCT See: Air Conditioning Unit/Removal
50. REMOVE INSTRUMENT PANEL BRACE SUB-ASSEMBLY See: Air Conditioning Unit/Removal
51. REMOVE NO. 1 AIR DUCT
(a) Disengage the 3 claws and remove the air duct.
52. REMOVE PTC HEATER ASSEMBLY
(a) Disconnect the connector and 2 clamps.
(b) Remove the 2 screws and PTC heater from the air conditioning unit.
Installation