xD L4-1.8L (2ZR-FE) (2008)
/Page-2193001.png)
Dome Lamp: Component Tests and General Diagnostics
Room Light Assembly (for Center)
LIGHTING: ROOM LIGHT ASSEMBLY (for Center): INSPECTION
INSPECTION
1. INSPECT ROOM LIGHT ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, repair or replace the harness or connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
If the result is not as specified, repair or replace the harness or connector.
(c) Remove the wire harness from the room light assembly.
