xD L4-1.8L (2ZR-FE) (2008)
(d) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the switch base.
(e) Connect the (+) lead from the battery to terminal B and the (-) lead to the light busbar.
OK:
The light comes on.
If the result is not as specified, replace the bulb.
Room Light Assembly (for Luggage Compartment)
LIGHTING: ROOM LIGHT ASSEMBLY (for Luggage compartment): INSPECTION
INSPECTION
1. INSPECT ROOM LIGHT ASSEMBLY
(a) Check the light operation.
(1) Connect the positive (+) battery lead to terminal 2 and the negative (-) battery lead to terminal 1, then check that the light comes on.
OK:
The light comes on.
If the result is not as specified, replace the bulb.