xD L4-1.8L (2ZR-FE) (2008)
(a) Turn the ignition switch off.
(b) Disconnect the F47 P-CAN junction connector.
(c) Measure the resistance according to the value in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE CAN MAIN WIRE CONNECTED TO POWER STEERING ECU (CAN-H, CAN-L)
OK -- REPLACE P-CAN J/C (JUNCTION CONNECTOR)
Center Airbag Sensor Communication Stop Mode
CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: Center Airbag Sensor Communication Stop Mode
Center Airbag Sensor Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM