xD L4-1.8L (2ZR-FE) (2008)
NEXT -- Continue to next step.
8. CHECK CAN MAIN WIRE OR CONNECTOR (D-CAN J/C - ECM)
(a) Turn the ignition switch off.
(b) Disconnect the F46 D-CAN junction connector.
(c) Measure the resistance according to the value in the table below.
Standard resistance::
NG -- REPAIR OR REPLACE CAN MAIN WIRE CONNECTED TO ECM (ECM - D-CAN J/C (CAN-H, CAN-L))
OK -- Continue to next step.
9. CHECK CAN MAIN WIRE OR CONNECTOR (D-CAN J/C - P-CAN J/C)
(a) Turn the ignition switch off.
(b) Disconnect the F46 D-CAN junction connector.
(c) Measure the resistance according to the value in the table below.
Standard resistance::
NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (D-CAN J/C - P-CAN J/C)
OK -- REPLACE D-CAN J/C
10. CONNECT CONNECTOR
(a) Reconnect the power steering ECU connector.
NEXT -- Continue to next step.
11. CHECK CAN MAIN WIRE CONNECTED TO POWER STEERING ECU (P-CAN J/C - POWER STEERING ECU)