scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2950 > < Initial Inspection and Diagnostic Overview|Page 2948
Page 25
background image

Standard resistance:

NG -- CHECK CAN BUS LINE FOR SHORT TO +B (ABS AND TRACTION ACTUATOR (SKID CONTROL ECU) BRANCH
WIRE)
OK -- Continue to next step.

11. CHECK CAN BUS LINE FOR SHORT TO +B (D-CAN J/C - STEERING SENSOR)

NOTE: For vehicles without VSC, go to step 12.

(a) Measure the resistance according to the values in the table below.
HINT: The resistance must be measured after the F46 D-CAN junction connector is disconnected.

Standard resistance:

NG -- CHECK CAN BUS LINE FOR SHORT TO +B (STEERING SENSOR BRANCH WIRE)
OK -- Continue to next step.

12. CHECK CAN BUS LINE FOR SHORT TO +B (D-CAN J/C - AIR CONDITIONING AMPLIFIER)

Initial Inspection and Diagnostic Overview|Page 2950 > < Initial Inspection and Diagnostic Overview|Page 2948