scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2986 > < Initial Inspection and Diagnostic Overview|Page 2984
Page 61
background image

NG -- CHECK CAN BUS LINES FOR SHORT CIRCUIT (D-CAN J/C - P-CAN J/C)
OK -- Continue to next step.

4. CHECK CAN BUS LINES FOR SHORT CIRCUIT (P-CAN J/C - POWER STEERING ECU)

(a) Measure the resistance according to the value in the table below.
HINT: The resistance must be measured after the F47 P-CAN junction connector is disconnected.

Standard resistance:

NG -- CHECK CAN BUS LINES FOR SHORT CIRCUIT (POWER STEERING ECU MAIN WIRE)
OK -- Continue to next step.

5. CHECK CAN BUS LINES FOR SHORT CIRCUIT (P-CAN J/C - YAW RATE SENSOR)

NOTE: For vehicles without VSC, go to step 6.

(a) Measure the resistance according to the value in the table below.
HINT: The resistance must be measured after the F47 P-CAN junction connector is disconnected.

Standard resistance:

NG -- CHECK CAN BUS LINES FOR SHORT CIRCUIT (YAW RATE SENSOR BRANCH WIRE)
OK -- Continue to next step.

6. CHECK CAN BUS LINES FOR SHORT CIRCUIT (P-CAN J/C - COMBINATION METER ECU)

Initial Inspection and Diagnostic Overview|Page 2986 > < Initial Inspection and Diagnostic Overview|Page 2984