scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2990 > < Initial Inspection and Diagnostic Overview|Page 2988
Page 65
background image

(a) Measure the resistance according to the value in the table below.
HINT: The resistance must be measured after the F46 D-CAN junction connector is disconnected.

Standard resistance:

NG -- CHECK CAN BUS LINES FOR SHORT CIRCUIT (AIR CONDITIONING AMPLIFIER BRANCH WIRE)
OK -- Continue to next step.

14. CHECK CAN BUS LINES FOR SHORT CIRCUIT (D-CAN J/C - CENTER AIRBAG SENSOR ASSEMBLY)

(a) Measure the resistance according to the value in the table below.
HINT: The resistance must be measured after the F46 D-CAN junction connector is disconnected.

Standard resistance:

NG -- CHECK CAN BUS LINES FOR SHORT CIRCUIT (CENTER AIRBAG SENSOR ASSEMBLY BRANCH WIRE)
OK -- Continue to next step.

15. CHECK CAN BUS LINES FOR SHORT CIRCUIT (D/CAN J/C - MAIN BODY ECU)

Initial Inspection and Diagnostic Overview|Page 2990 > < Initial Inspection and Diagnostic Overview|Page 2988