xD L4-1.8L (2ZR-FE) (2008)
Fuel Injector: Service and Repair
Removal
2ZR-FE FUEL: FUEL INJECTOR: REMOVAL
REMOVAL
1. DISCHARGE FUEL SYSTEM PRESSURE
See: Service Precautions/Vehicle Damage Warnings
2. REMOVE NO. 2 CYLINDER HEAD COVER See: Ignition System/Ignition Coil/Service and Repair/Removal
3. REMOVE NO. 2 VENTILATION HOSE
(a) Remove the No. 2 ventilation hose.
4. SEPARATE ENGINE WIRE HARNESS
(a) Remove the 3 bolts, harness clamp and 4 fuel injector connectors and separate the engine wire harness.
5. REMOVE HARNESS BRACKET
(a) Disconnect the 5 wire harness clamps shown in the illustration.
(b) Remove the 2 bolts and remove the 2 harness brackets.
6. DISCONNECT NO. 1 FUEL VAPOR FEED HOSE