xD L4-1.8L (2ZR-FE) (2008)
(a) Disconnect the No. 1 fuel vapor feed hose.
7. DISCONNECT VACUUM HOSE
(a) Disconnect the vacuum hose.
8. REMOVE FUEL PIPE CLAMP
(a) Remove the fuel pipe clamp.
9. DISCONNECT FUEL TUBE SUB-ASSEMBLY
(a) Pinch the retainer of the fuel tube connector, then pull out the fuel tube connector to disconnect the fuel tube from the fuel pipe.
NOTE:
-
Remove any dirt and foreign matter from the fuel tube connector before performing this work.
-
Do not allow any scratches or foreign matter on the parts when disconnecting as the fuel tube connector has O-rings that seal the pipe.
-
Perform this work by hand. Do not use any tools.
-
Do not forcibly bend, twist or turn the nylon tube.
-
Protect the disconnected parts by covering them with vinyl bags after disconnecting the fuel tube.
-
If the fuel tube connector and pipe are stuck, push and pull to release them.