xD L4-1.8L (2ZR-FE) (2008)
/Page-1802008.png)
(1) Place at least 2 tires under the tire to which the front passenger airbag is tied.
(2) Place at least 2 tires over the tire to which the front passenger airbag is tied. A disc wheel should be installed onto the top tire.
NOTE: Do not place the SST connector under the tire because it could be damaged.
(3) Tie the tires together with 2 wire harnesses.
CAUTION: Make sure that the wire harnesses are tight. It is highly dangerous when a loose wire harness results in the tires coming
free due to the shock when the airbag is deployed.
(f) Connect SST.
SST: 09082-00700
NOTE: Do not lock the secondary lock of the twin lock to avoid damaging the SST connector and wire harness. Also, secure some slack for
SST wire harness inside the tire.
(g) Deploy the airbag.
(1) Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.
(2) Check that no one is within a 10 m (33 ft) radius of the tire to which the front passenger airbag is tied.
(3) Press the SST activation switch and deploy the airbag.
CAUTION: Make sure that no one is near the tires when deploying the airbag.
HINT: The airbag is deployed as the LED on the SST activation switch illuminates.
(h) Dispose of the front passenger airbag.
CAUTION:
