xD L4-1.8L (2ZR-FE) (2008)
-
The front passenger airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
-
Use gloves and safety glasses when handling a front passenger airbag which has been deployed.
-
Do not apply water, etc. to a front passenger airbag which has been deployed.
-
Always wash your hands with water after completing the operation.
(1) Remove the front passenger airbag from the tire.
(2) Place the front passenger airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.
Removal
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: REMOVAL
REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing See: Service Precautions.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
2. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Removal
3. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Removal
4. REMOVE FRONT PILLAR GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
5. REMOVE FRONT PILLAR GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Service and Repair/Combination Meter/Removal
7. REMOVE COMBINATION METER ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service
and Repair/Combination Meter/Removal
8. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Upper Instrument Panel/Removal
9. REMOVE INSTRUMENT CLUSTER FINISH PANEL RETAINER See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Removal
10. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Removal
11. REMOVE UPPER INSTRUMENT PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Upper Instrument Panel/Removal