xD L4-1.8L (2ZR-FE) (2008)
12. REMOVE INSTRUMENT PANEL WIRE ASSEMBLY
(a) Using a thin-bladed screwdriver, release the locking button.
(b) Using a thin-bladed screwdriver, disconnect the 2 airbag connectors and remove the instrument panel wire assembly.
13. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
(a) Remove the wire harness from the claw on the instrument panel.
(b) Remove the 2 screws.
(c) Disengage the 10 hooks and remove the front passenger airbag.
Installation
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION
INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing See: Service Precautions.
1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
(a) Engage the 10 hooks so that the connector side faces the outside of the vehicle, and install the front passenger airbag.
(b) Install the 2 screws.
(c) Install the wire harness onto the claw of the instrument panel.