xD L4-1.8L (2ZR-FE) (2008)
2. INSTALL INSTRUMENT PANEL WIRE ASSEMBLY
(a) Connect the airbag connector to install the instrument panel wire.
NOTICE:
-
Match the color of the connector of the instrument panel wire assembly with that of the connector of the front passenger assembly and
install the airbag connector.
-
Lock the locking button securely.
3. INSTALL UPPER INSTRUMENT PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Upper Instrument Panel/Installation
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Installation
5. INSTALL INSTRUMENT CLUSTER FINISH PANEL RETAINER See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Installation
6. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Upper Instrument Panel/Installation
7. INSTALL COMBINATION METER ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service
and Repair/Combination Meter/Installation
8. INSTALL INSTRUMENT CLUSTER FINISH PANEL See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Service and Repair/Combination Meter/Installation
9. INSTALL FRONT PILLAR GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
10. INSTALL FRONT PILLAR GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
11. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Installation
12. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Installation
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
14. INSPECT SRS WARNING LIGHT
See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System