xD L4-1.8L (2ZR-FE) (2008)
Air Bag: Testing and Inspection
Front Seat Side Airbag Assembly
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT SIDE AIRBAG ASSEMBLY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT FRONT SEAT SIDE AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(b) With the front seat side airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace
the front seat side airbag with a new one:
-
Any cuts, minute cracks or marked discoloration on the front seat airbag.
2. INSPECT FRONT SEAT SIDE AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
CAUTION: For front seat side airbag removal and installation procedures, See: Body and Frame/Seats/Service and Repair/Front
Seat Assembly/Removal and See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Installation, and carefully follow the
correct procedure.
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(b) With the front seat side airbag removed from the vehicle, perform a visual check. If there are any defects, such as those mentioned below,
replace the front seat side airbag with a new one:
-
Any cuts, minute cracks or marked discoloration on the front seat airbag.
-
Any cracks or other damage to the wire harness or connector.