xD L4-1.8L (2ZR-FE) (2008)
Shield Airbag Assembly/Removal and See: Air Bag Systems/Air Bag/Service and Repair/Curtain Shield Airbag Assembly/Installation, and
carefully follow the correct procedure.
(a) Perform a diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check
/ Clear.
(b) With the curtain shield airbag removed from the vehicle, if there are any defects, such as those mentioned below, replace the curtain shield
airbag with a new one:
-
Any cuts, minute cracks or marked discoloration on the curtain shield airbag.
-
Any cracks or other damage to the connector.
Front Airbag Sensor
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT AIRBAG SENSOR: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT FRONT AIRBAG SENSOR (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check
/ Clear.
2. INSPECT FRONT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
CAUTION: For front airbag sensor removal and installation procedures, See: Air Bag Systems/Impact Sensor/Service and
Repair/Front Airbag Sensor/Removal and See: Air Bag Systems/Impact Sensor/Service and Repair/Front Airbag Sensor/Installation, and
carefully follow the correct procedure.
(a) Perform a diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check
/ Clear.
(b) When the center front bumper or its periphery is damaged, check whether there is any damage to the front airbag sensor. If there are any
defects, such as those mentioned below, replace the front airbag sensor with a new one:
-
Any cracks, dents or chips in the case.
-
Any cracks or other damage to the connector.
-
Peeling of the label or damage to the serial number.
3. INSPECT FRONT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision)
CAUTION: For front airbag sensor removal and installation procedures, See: Air Bag Systems/Impact Sensor/Service and
Repair/Front Airbag Sensor/Removal and See: Air Bag Systems/Impact Sensor/Service and Repair/Front Airbag Sensor/Installation, and
carefully follow the correct procedure.
(a) Replace the front airbag sensor.
Front Passenger Airbag
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check
/ Clear.
(b) With the front passenger airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below,
replace the instrument panel with a new one:
-
Any cuts, minute cracks or marked discoloration on the instrument panel around the front passenger airbag.
2. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)