xD L4-1.8L (2ZR-FE) (2008)
CAUTION: For front passenger airbag removal and installation procedures, See: Air Bag Systems/Air Bag/Service and Repair/Front
Passenger Airbag Assembly/Removal and See: Air Bag Systems/Air Bag/Service and Repair/Front Passenger Airbag Assembly/Installation,
and carefully follow the correct procedure.
(a) Perform a diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check
/ Clear.
(b) With the front passenger airbag removed from the vehicle, perform a visual check. If there are any defects, such as those mentioned below,
replace the front passenger airbag, instrument panel or instrument panel reinforcement with new ones:
-
Any cuts, minute cracks or marked discoloration on the front passenger airbag.
-
Any cracks or other damage to the connector.
-
Deformation or cracks on the instrument panel or instrument panel reinforcement.
Front Seat Side Airbag
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT SIDE AIRBAG ASSEMBLY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT FRONT SEAT SIDE AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check
/ Clear.
(b) With the front seat side airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace
the front seat side airbag with a new one:
-
Any cuts, minute cracks or marked discoloration on the front seat airbag.