scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Front Seat Outer Belt Assembly|Page 6708 > < Front Seat Outer Belt Assembly|Page 6706
Page 4
background image

(1) Connect SST, then the yellow connector to the seat belt pretensioner.

SST: 09082-00770

NOTE: Do not lock the secondary lock of the twin lock to avoid damaging the SST connector and wire harness.

(2) Move SST at least 10 m (33 ft) away from the front of the vehicle.

SST: 09082-00700

(3) Close the doors and windows of the vehicle.
NOTE: Take care not to damage the SST wire harness.
HINT: Do not close the windows fully. Leave a gap for inserting the SST wire harness.
(4) Connect the SST red clip to the positive battery terminal and the black clip to the negative battery terminal.

(e) Activate the seat belt pretensioner.

(1) Confirm that no one is inside the vehicle or within 10 m (33 ft) of the vehicle.
(2) Press the SST activation switch and activate the seat belt pretensioner.
HINT: The seat belt pretensioner operates simultaneously with the SST activation switch LED light.

(f) Disconnect SST.
(g) Dispose of the front seat outer belt (with the seat belt pretensioner).

HINT: When scrapping a vehicle, activate the seat belt pretensioner, and then scrap the vehicle with the activated front seat outer belt still
installed.
CAUTION:
-

Do not touch the front seat outer belt for at least 30 minutes after the seat belt pretensioner has been activated. It is very hot.

-

Use gloves and safety glasses when handling a front seat outer belt with a pretensioner that has been activated.

-

Always wash your hands with water after completing the operation.

-

Do not apply water to a front seat outer belt that has an activated pretensioner.

2. DISPOSE OF FRONT SEAT OUTER BELT ASSEMBLY (When not Installed in Vehicle)

HINT: Prepare a battery as the power source to activate the seat belt pretensioner.
NOTICE:
-

When only disposing of the front seat outer belt (with the seat belt pretensioner), never use the customer's vehicle to activate the seat belt
pretensioner.

-

Be sure to follow the procedures described below when activating the seat belt pretensioner.

(a) Remove the front seat outer belt See: Removal.

Front Seat Outer Belt Assembly|Page 6708 > < Front Seat Outer Belt Assembly|Page 6706