xD L4-1.8L (2ZR-FE) (2008)
Removal
SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: REMOVAL
REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing See: Air Bag Systems/Service Precautions.
NOTE: Always use "TORX" socket wrench E10 when removing the front seat.
HINT: The procedure described below is for the driver side. Use the same procedure for both the driver and front passenger sides, unless
otherwise specified.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Removal