xD L4-1.8L (2ZR-FE) (2008)
3. REMOVE FRONT SEAT ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Removal
4. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
(a) Disconnect the seat position sensor connector.
(b) Remove the buckle switch connector.
(c) Remove the 2 wiring harness clamps.
(d) Remove the wiring harness from the claw on the front seat cushion shield.
(e) Remove the bolt and the front seat inner belt.
5. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH
(a) Remove the buckle switch connector.
(b) Remove the 2 wiring harness clamps.
(c) Remove the wiring harness from the claw on the front seat cushion shield.
(d) Remove the bolt and the front seat inner belt.
Installation
SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION
INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing See: Air Bag Systems/Service Precautions.