xD L4-1.8L (2ZR-FE) (2008)
(d) Install the front airbag sensor with the 2 bolts.
Torque: 9.0 Nm (90 kgf-cm, 80 in-lbf)
(e) Confirm that there is no looseness by shaking the front airbag sensor.
2. INSTALL FRONT BUMPER COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
4. INSPECT SRS WARNING LIGHT
See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System