xD L4-1.8L (2ZR-FE) (2008)
Starter Motor: Service and Repair
Disassembly
2ZR-FE STARTING: STARTER: DISASSEMBLY
DISASSEMBLY
1. REMOVE MAGNET SWITCH BODY
(a) Remove the nut, and disconnect the lead wire from the terminal C.
(b) Remove the 2 screws and magnet switch body from the starter drive housing assembly.
(c) Remove the return spring and the plunger from the magnet switch body.
2. REMOVE STARTER YOKE ASSEMBLY
(a) Remove the 2 through bolts, and pull out the starter yoke assembly and starter commutator end frame assembly together.
(b) Remove the starter yoke assembly from the starter commutator end frame assembly.