xD L4-1.8L (2ZR-FE) (2008)
Starter Motor: Service and Repair
Reassembly
2ZR-FE STARTING: STARTER: REASSEMBLY
REASSEMBLY
1. INSTALL STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY
(a) Apply grease to the drive lever set pin, as shown in the illustration.
(b) Install the drive lever set pin into the starter center bearing clutch sub-assembly.
(c) Install the starter center bearing clutch sub-assembly together with the starter drive lever set pin into the starter drive housing assembly.
2. INSTALL STARTER PLANETARY GEAR
(a) Apply grease to the planetary gears and pin parts of the planetary shaft as shown in the illustration.