xD L4-1.8L (2ZR-FE) (2008)
Standard voltage (for manual transaxle models):
HINT:
-
The junction connector is in the engine room relay block and junction block as the illustration above.
-
During this inspection, all connectors and relays should be connected.
NG -- INSPECT CLUTCH START SWITCH OR PARK/NEUTRAL POSITION SWITCH
OK -- Continue to next step.
4. INSPECT CLUTCH START SWITCH OR PARK/NEUTRAL POSITION SWITCH
(a) Inspect the Park/Neutral Position (PNP) switch connector (for automatic transaxle models).
(1) Disconnect the park/neutral position switch connector.
(2) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(3) Reconnect the park/neutral position switch connector.