xD L4-1.8L (2ZR-FE) (2008)
(b) Inspect the clutch start switch (for manual transaxle models).
(1) Disconnect the clutch start switch connector.
(2) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(3) Reconnect the clutch start switch connector.
Result:
C -- CHECK HARNESS AND CONNECTOR (CLUTCH START SWITCH OR PNP SWITCH - ECM - ST RELAY)
B -- CHECK HARNESS AND CONNECTOR (PNP SWITCH - ECM)
A -- REPLACE CLUTCH START SWITCH OR PARK/NEUTRAL POSITION SWITCH
5. CHECK HARNESS AND CONNECTOR (PNP SWITCH - ECM)
(a) Disconnect the Park/Neutral Position (PNP) switch connector.
(b) Disconnect the ECM connector.