xD L4-1.8L (2ZR-FE) (2008)
/Page-1555004.png)
(i) Install the front wheel.
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
(j) Check the camber.
If the measured value is not within the specifications, calculate the required adjustment amount using the formula below.
(Camber adjustment amount) = Center of specified range - Measured value
Check the combination of installed bolts. Select appropriate bolts from the table below to adjust the camber to within the specified range.
HINT: Try to adjust the camber to the center of the specified range.
(k) Table (1) (Move the axle toward the positive side)
(l) Table (2) (Move the axle toward the negative side).
