xD L4-1.8L (2ZR-FE) (2008)
Steering Gear: Service and Repair
Removal
POWER STEERING: POWER STEERING GEAR: REMOVAL
REMOVAL
1. POSITION FRONT WHEELS FACING STRAIGHT AHEAD
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
6. REMOVE HOOD TO COWL TOP SEAL See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
7. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Removal
8. REMOVE COWL TOP VENTILATOR LOUVER LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
9. REMOVE FRONT WIPER MOTOR AND LINK See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
10. REMOVE FRONT AIR SHUTTER SEAL RH
11. REMOVE OUTER COWL TOP PANEL
12. REMOVE COLUMN HOLE COVER SILENCER SHEET
(a) Remove the floor carpet and 2 clips and remove the column hole cover silencer.
13. REMOVE STEERING SLIDING YOKE SUB-ASSEMBLY
(a) Use a seat belt to fix the steering wheel assembly in place, in order to avoid breaking of the spiral cable.