xD L4-1.8L (2ZR-FE) (2008)
(c) Using an engine sling device and a chain block, support the engine assembly.
23. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY
(a) Remove the bolt and separate the engine moving control rod.
(b) Support the front suspension crossmember with a transmission jack.
(c) Remove the 6 bolts and remove the suspension crossmember.
24. REMOVE POWER STEERING GEAR
(a) Remove the 2 bolts and 2 nuts and remove the power steering gear from the suspension crossmember.
NOTE: Keep the nut from rotating while turning the bolt.
25. SECURE POWER STEERING GEAR
(a) Using SST, secure the steering gear in a vise.
SST: 09612-00012
HINT: Tape SST before use.
26. REMOVE TIE ROD END SUB-ASSEMBLY LH