xD L4-1.8L (2ZR-FE) (2008)
Steering Wheel: Service and Repair
Installation
STEERING COLUMN: STEERING WHEEL: INSTALLATION
INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. INSTALL STEERING WHEEL LOWER BOSS COVER
(a) Engage the claw and install the steering wheel lower boss cover.
(b) Tighten the screw.
2. INSTALL STEERING WHEEL See: Steering Column/Service and Repair/Installation
3. INSTALL NO. 1 STEERING WHEEL ORNAMENT
(a) Engage the 2 claws and the pin.
(b) Install the steering pad switch LH with the screw.
4. INSTALL STEERING PAD SWITCH
5. INSTALL CRUISE CONTROL MAIN SWITCH
6. INSTALL STEERING PAD
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
8. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System