xD L4-1.8L (2ZR-FE) (2008)
Control Arm: Service and Repair
Installation
SUSPENSION: FRONT LOWER SUSPENSION ARM: INSTALLATION
INSTALLATION
1. TEMPORARILY TIGHTEN FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH
(a) Install the lower arm onto the crossmember and provisionally tighten the bolt.
2. TEMPORARILY TIGHTEN FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT: Perform the same procedure as for the LH side.
3. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY See: Cross-Member/Front Cross-Member/Service and
Repair/Installation
4. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
5. INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
6. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH
7. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
8. INSTALL TIE ROD END SUB-ASSEMBLY LH
9. INSTALL TIE ROD END SUB-ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
10. INSTALL NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY See: Steering/Steering Gear/Service and Repair/Installation
11. INSTALL STEERING SLIDING YOKE SUB-ASSEMBLY See: Steering/Steering Gear/Service and Repair/Installation
12. INSTALL COLUMN HOLE COVER SILENCER SHEET See: Steering/Steering Gear/Service and Repair/Installation
13. TEMPORARILY TIGHTEN FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH (for Manual Transaxle)
(a) Provisionally tighten the lower arm with the 2 bolts.