xD L4-1.8L (2ZR-FE) (2008)
19. INSTALL STEERING SLIDING YOKE SUB-ASSEMBLY
(a) Align the matchmarks and install the sliding yoke onto the intermediate shaft.
Torque: 35 Nm (360 kgf-cm, 26 ft-lbf)
(b) Tighten bolt A.
Torque: 35 Nm (360 kgf-cm, 26 ft-lbf)
20. INSTALL COLUMN HOLE COVER SILENCER SHEET
(a) Install the column hole cover silencer sheet with the 2 clips.
(b) Install the floor carpet.
21. INSTALL FRONT WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
22. POSITION WHEELS FACING STRAIGHT AHEAD
23. STABILIZE SUSPENSION See: Control Arm/Service and Repair/Installation
24. FULLY TIGHTEN FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH See: Control Arm/Service and Repair/Installation
25. FULLY TIGHTEN FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
26. INSTALL OUTER COWL TOP PANEL
27. INSTALL FRONT AIR SHUTTER SEAL RH
28. INSTALL WINDSHIELD WIPER MOTOR AND LINK See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
29. INSTALL COWL TOP VENTILATOR LOUVER LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
30. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
31. INSTALL HOOD TO COWL TOP SEAL See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation
32. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
33. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation