xD L4-1.8L (2ZR-FE) (2008)
(d) Install the engine moving control rod with the bolt.
Torque: 120 Nm (1224 kgf-cm, 89 ft-lbf)
12. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH
13. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT: Use the same procedure for the LH side.
14. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
15. INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT: Use the same procedure for the LH side.
16. INSTALL TIE ROD END SUB-ASSEMBLY LH
17. INSTALL TIE ROD END SUB-ASSEMBLY RH
HINT: Use the same procedure for the LH side.
18. INSTALL NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY
(a) Install clip B onto the body portion and install steering column hole cover onto the body portion with clip A.
NOTE: Make sure that the lip portion of steering column hole cover is not damaged.