xD L4-1.8L (2ZR-FE) (2008)
(b) Remove the coil spring, coil spring insulator upper and coil spring insulator lower.
14. REMOVE REAR COIL SPRING RH
HINT: The removal procedure for the RH side is the same as that for the LH side.
Installation
SUSPENSION: REAR COIL SPRING: INSTALLATION
INSTALLATION
1. INSTALL REAR COIL SPRING LH
(a) Install the coil spring insulator lower onto the axle beam.
(b) Install the coil spring insulator upper so that its gap fits onto the end of coil spring.
(c) Install the coil spring onto the axle beam.
NOTE: The paint mark of the coil spring should be towards the underside and rear side of the vehicle.
2. INSTALL REAR COIL SPRING RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
3. TEMPORARILY TIGHTEN REAR SHOCK ABSORBER LH See: Suspension Strut / Shock Absorber/Service and Repair/Rear Shock
Absorber/Installation
4. TEMPORARILY TIGHTEN REAR SHOCK ABSORBER RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
5. INSTALL REAR SHOCK ABSORBER CAP LH
6. INSTALL REAR SHOCK ABSORBER CAP RH
7. INSTALL REAR ABSORBER CAP
8. INSTALL REAR ABSORBER CAP
9. INSTALL REAR LH FLEXIBLE HOSE
(a) Connect the flexible hose onto the axle beam with a new clip.
(b) Using a union nut wrench, install the brake tube.