xD L4-1.8L (2ZR-FE) (2008)
14. INSTALL TRANSAXLE CASE OIL SEAL
(a) Coat the lip of a new transaxle case oil seal with MP grease.
(b) Using SST and a hammer, install the transaxle case oil seal.
SST: 09710-20011
09710-06071
SST: 09950-70010
09951-07200
Drive in depth:
2.2 to 3.2 mm (0.087 to 0.126 in.)
NOTE: Do not damage the oil seal lip.
15. INSTALL FRONT TRANSAXLE CASE OIL SEAL
(a) Coat the lip of a new front transaxle case oil seal with MP grease.
(b) Using SST and a hammer, install the front transaxle case oil seal.
SST: 09554-14010
SST: 09950-70010
09951-07200
Drive in depth:
-0.5 to 0.5 mm (-0.020 to 0.020 in.)
NOTE: Do not damage the oil seal lip.
16. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation
17. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation
18. INSTALL FRONT AXLE ASSEMBLY See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation
19. INSTALL FRONT LOWER SUSPENSION ARM See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation
20. INSTALL TIE ROD END SUB-ASSEMBLY See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation
21. INSTALL FRONT STABILIZER LINK ASSEMBLY See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation
22. INSTALL FRONT SPEED SENSOR See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation
23. INSTALL FRONT AXLE HUB NUT See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation