xD L4-1.8L (2ZR-FE) (2008)
(e) Provisionally install the manual detent spring and manual detent spring cover with the 2 bolts.
Bolt length:
14 mm (0.55 in.) for bolt A
45 mm (1.77 in.) for bolt B
(f) Check that the manual valve lever is in contact with the center of the roller at the tip of the detent spring.
(g) Tighten the 15 bolts.
Torque: 11 Nm (110 kgf-cm, 8 ft-lbf)
(h) Connect the 5 shift solenoid valve connectors.
(i) Install the ATF temperature sensor with the lock plate and bolt.
Torque: 11 Nm (110 kgf-cm, 8 ft-lbf)
Bolt length:
55 mm (2.17 in.)
2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
(a) Coat a new oil strainer gasket with ATF, and install it into the valve body oil strainer assembly.
(b) Install the valve body oil strainer assembly with the 3 bolts.
Torque: 11 Nm (110 kgf-cm, 8 ft-lbf)
3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY