xD L4-1.8L (2ZR-FE) (2008)
Clutch Pedal Assembly: Service and Repair
Removal
CLUTCH: CLUTCH PEDAL: REMOVAL
REMOVAL
1. REMOVE BRAKE BOOSTER ASSEMBLY
2. REMOVE CLUTCH RESERVOIR TUBE See: Clutch Hydraulic System/Clutch Master Cylinder/Service and Repair/Removal
3. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE See: Clutch Hydraulic System/Clutch Master Cylinder/Service
and Repair/Removal
4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
5. REMOVE INSTRUMENT PANEL UNDER TRAY
6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY See: Clutch Hydraulic System/Clutch Master Cylinder/Service and Repair/Removal
7. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
8. REMOVE COMBINATION METER ASSEMBLY
9. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY
(a) Disconnect the wire harness clamp.
(b) Disconnect the clutch start switch connector.
(c) Disconnect the clutch switch connector.
(d) Remove the bolt and clutch pedal support.
10. REMOVE CLUTCH START SWITCH ASSEMBLY
(a) Remove the nut and clutch start switch.