xD L4-1.8L (2ZR-FE) (2008)
10. INSTALL TIE ROD END SUB-ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
11. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Installation
12. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
13. INSTALL FRONT SPEED SENSOR LH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation
14. INSTALL FRONT SPEED SENSOR RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
15. INSTALL FRONT AXLE HUB NUT LH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation
16. INSTALL FRONT AXLE HUB NUT RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
17. INSTALL FRONT WHEELS
18. ADD TRANSAXLE OIL
19. INSPECT AND ADJUST TRANSAXLE OIL See: Fluid - M/T/Testing and Inspection
20. INSPECT ABS SPEED SENSOR SIGNAL
21. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
22. INSPECT FOR TRANSAXLE OIL LEAK